きのしのきょう

とりあえず、dmesgあげときますね。

root@% dmesg
Copyright (c) 1996-2009, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 9.6R1.13 #0: 2009-08-01 09:02:46 UTC
    builder@lanath.juniper.net:/volume/build/junos/9.6/release/9.6R1.13/obj-i386/bsd/sys/compile/JUNIPER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (332.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 805240832 (767 MB)
avail memory = 775278592 (739 MB)
Initializing M/T platform properties ..
cpu0 on motherboard
DRAM Data Integrity Mode: ECC Mode with h/w scrubbing
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
smb0: <Intel 82371AB SMB controller> port 0x5000-0x500f at device 7.3 on pci0
cbb0: <TI1251B PCI-CardBus Bridge> mem 0xe6205000-0xe6205fff irq 15 at device 13.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1251B PCI-CardBus Bridge> mem 0xe6200000-0xe6200fff irq 7 at device 13.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xe6204000-0xe6204fff,0xe6100000-0xe61fffff irq 7 at device 16.0 on pci0
pcib1: <PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xe000-0xe03f mem 0xe6207000-0xe6207fff,0xe6000000-0xe60fffff irq 10 at device 19.0 on pci0
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc87ff,0xc9000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: MDA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1 at port 0x3e8-0x3ef irq 5 on isa0
sio1: type 16550A
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 3 ..
fxp0: Ethernet address 00:a0:a5:XX:XX:XX
fxp1: Ethernet address 02:00:00:XX:XX:XX
Timecounter "TSC" frequency 332522588 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: Device does not support APM
ad0: 488MB <SanDisk SDCFJ-512 HDX 4.03> at ata0-master PIO4
ad1: 11513MB <IBM DARA-212000 AR4OA51A> at ata0-slave UDMA33
Trying to mount root from ufs:/dev/ad0s1a
fxp1: link media UP 100Mb / full-duplex
TNP: version is changed from 3 to 1
TNPv1: adding neighbor 0x00000002 to interface fxp1.
Loading the DS0 Media Layer; Attaching to media services layer
Loading the DS1/E1 Media Layer; Attaching to media services layer
Loading the DS3/E3 Media Layer; Attaching to media services layer
Loading the IMA Group Media Layer; Attaching to media services layer
Loading the IMA Link Media Layer; Attaching to media services layer
Loading the SONET Media Layer; Attaching to media services layer
Loading DS0 driver
Loading E1/T1/J1 driver
Loading the NETPFE DS3 module
Loading the NETPFE ethernet module
Loading common multilink module.
Loading the SONET apsg module
Loading POS driver
fxp0: media DOWN 10Mb / half-duplex
Loading the NETPFE picpeer module
Loading the NETPFE PPPoE module
Loading Aggregate sonet driver
Loading shared uplink driver
Loading the netpfe services driver
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Loading Link Services PICs module.
Loading Multilink Services PICs module.
Loading the M&T Platform NETPFE module
kbd1 at kbdmux0
Microcode: Header revision 1, Date 5/5/1999, Platform Id 0x20
Microcode: updated from revision 0 to 11, date=05051999
mastership: routing engine 0 becoming master
setting server address to 0x00000001
TNPv1: adding neighbor 0x00000001 to interface fxp1.
setsockopt(RTS_ASYNC_NEED_RESYNC) ignored (lacpd): client already active
setsockopt(RTS_ASYNC_NEED_RESYNC) ignored (l2ald): client already active
setsockopt(RTS_ASYNC_NEED_RESYNC) ignored (cosd): client already active
setsockopt(RTS_ASYNC_NEED_RESYNC) ignored (pppd): client already active
fxp1: link media DOWN 10Mb / half-duplex
TNPv1: deleting active neighbor entry 0x2 from interfacefxp1.
fxp1: media DOWN 100Mb / full-duplex
fxp1: link UP 100Mb / full-duplex
TNPv1: adding neighbor 0x00000002 to interface fxp1.
fxp1: link media DOWN 10Mb / half-duplex
fxp1: media DOWN 100Mb / full-duplex
fxp1: link UP 100Mb / full-duplex
TNP: version is changed from 1 to 3
fxp1: link DOWN 100Mb / full-duplex
fxp1: link UP 100Mb / full-duplex
pfe_listener_connect: conn established: tnpaddr=0x2
if_pfe_peek_peer_info: peer_type 1, peer_index 0
pfe_peer_alloc: addr = 2
pfe_peer_update_mgmt_state: type 0, index 0, old state Init new state Opening mastership 1
pfe_peer_alloc: done addr = 2
pfe_msg_peer_info_post_decode: idx = 0
pfe_peer_attach: attaching peer=0xc38ed000, type=1, index=0
peertype 1 initialized
pfe_peer_attach: attached peer=0xc38ed000, type=1, index=0
pfe_peer_update_mgmt_state: type 1, index 0, old state Opening new state Resync mastership 1
pfe_peer_update_mgmt_state: type 1, index 0, old state Resync new state Online mastership 1